Back
Next
EM Software
QuickWave software for electromagnetic design and simulations based on conformal FDTD method.
Materials Measurement
Complete measurement setups for dielectric materials including test fixtures (resonators) and cost effective Microwave Q-Meter.
R&D Projects
Innovative activities in local and international Research and Development projects.
EM Consulting
Years of experience in supporting our customers in a wide variety of EM applications made us the right people to support you at any stage of a design cycle of your device.

EM Software

 

QuickWave is a general-purpose electromagnetic simulator based on the conformal FDTD method and supplemented with a range of unique models for curved boundaries, media interfaces, modal excitation, and parameter extraction. It has a well-established position on the world’s market due to approaching specific, challenging problems (often bound to QWED’s specialists participation in the customer’s projects as consultants). That kind of approach causes that QuickWave has a very broad variety of information which can be extracted from the simulations in a form of different pre-processings, co-processings and post-processings.

Read More
Complete 3D electromagnetic simulation.
Ultra-fast Vector 2D (V2D) solver for axisymmetrical structures (BOR - Bodies of Revolution) including antennas, circular waveguides discontinuities, and resonators.
Microwave heating analysis including loads rotation and translation, frequency tuning, heat flow and material parameters modification as a function of dissipated power.
Free general purpose 3D CAD modeller for QuickWave.

Materials Measurement

 

Complete measurement setups for dielectric materials including test fixtures (resonators) and cost effective Microwave Q-Meter.

Several types of resonators for precise measurements of electromagnetic properties of materials at microwave frequencies.

A novel type of a Fabry-Perot open resonator (FPOR) with Gaussian mirrors for automated broadband and precise resonant measurements of electromagnetic properties of low-loss dielectric sheets in the 20-110GHz frequency range.

Efficient imaging of material samples with a portable 2D scanner incorporating a 10GHz Split-Post Dielectric Resonator and driven by a low-form-factor vector or scalar network analyser.

Microwave Q-Meter - an inexpensive computer controlled microwave oscillator system that enables quick and automatic measurements with a dedicated SPDR and SiPDR.

Read More
Complete measurement setups for dielectric materials including cost effective Microwave Q-Meter.
Several types of resonators for precise measurements of electromagnetic properties of materials at microwave frequencies.
A novel type of a Fabry-Perot open resonator (FPOR) with Gaussian mirrors for automated broadband and precise resonant measurements of electromagnetic properties of low-loss dielectric sheets in the 20-110 GHz frequency range.
Efficient imaging of material samples with a portable 2D scanner incorporating a 10GHz Split-Post Dielectric Resonator and driven by a low-form-factor vector or scalar network analyser.

EM Consulting

 

Years of experience in supporting our customers in a wide variety of EM applications made us the right people to support you at any stage of a design cycle of your device. Our consulting engineers will help you to optimise and improve your early stage device or provide you with a full EM consulting service consisting of a whole design cycle - from an idea to a device.

Read More
QWED offers a wide range of electromagnetic consulting services.
Service of measurements based on the samples sent to us.
Service of simulations of the project described by the client or based on the CAD file.
Presentations, live simulations and hands-on training performed in QW-Modeller and QuickWave software.

R&D Projects

 

Innovative activities in local and international Research and Development projects.

Read More

Our Company

 

QWED is a dynamic hi-tech company, set up in 1997 and based in Warsaw, Poland, being a happy blend of academic researchers, microwave engineers, and computer experts.

 

QWED is a leading provider of ultra-fast solutions (QuickWave) for electromagnetic design and simulation, EM design consulting services and measurement setups for precise measurements of electromagnetic properties of materials at microwave frequencies.

Read More Contact Us
 

Events & News

Events
September 26-29, 2022, Milan, Italy
52nd European Microwave Week: Microwave and Radar Week EuMW

September 12-15, 2022, Gdansk, Poland
Exhibition at the MIKON conference during Microwave and Radar week 2022 in Gdansk, Poland.

June 14-16, 2022, Savannah, Georgia, USA
56th Annual Microwave Power Symposium (IMPI 56).

April 3-7, 2022, London, UK
51st European Microwave Week: Publication, Presentation, Women in Engineering, Partner Exhibits.

April 1-3, 2022, Warsaw, Poland
IEEE Region 8 Meeting: Exhibition, Presentation, Women in Engineering, Help Ukraine Actions.

September 13-16, 2021 (Virtual)
18th International Conference on Microwave and High-Frequency Applications: AMPERE 2021.

September 13-16, 2021 (Virtual)
QWED is a confirmed Silver Sponsor of the AMPERE 2021 Conference.

June 28-July 1, 2021 (Virtual)
55th Annual Microwave Power Symposium (IMPI 55).

June 20-25, 2021, Atlanta, USA (Virtual)
International Microwave Symposium IMS 2021.

March 2-4, 2021, Vienna, Austria (Virtual)
3rd International Workshop of The European Materials Modelling Council.

October 22, 2020, Warsaw, Poland
MIKON 2020 Short Course on Electromagnetic Modelling is going virtual.

October 5-7, 2020, Warsaw, Poland
Exhibition at the MIKON conference during Microwave and Radar week 2020 in Warsaw, Poland.

October 5-7, 2020, Warsaw, Poland
Short Course on Electromagnetic modelling during the Microwave and Radar week 2020 in Warsaw, Poland.

October 5-7, 2020, Warsaw, Poland
Material and Impedance Measurement Techniques in the Project MMAMA workshop during the Microwave and Radar week 2020 in Warsaw, Poland.

October 1, 2020, Valence, France
Project-end Workshop presenting MMAMA results to a wide audience of academic, industrial and EC participants.

June 21-26, 2020, Los Angeles, California, USA
Exhibition at the IEEE MTT-S International Microwave Symposium 2020.

January 22-24, 2020, Orlando, FL, USA
Electronic Materials Applications in 5G Telecommunications Symposium during Electronic Materials and Applications 2020 conference (EMA 2020).

December 10, 2019, Marina Bay Sands, Singapore
Resonant Measurement Methods of Dielectric and Ferromagnetic Materials in Microwave and mm-wave Spectra workshop during the 2019 Asia-Pacific Microwave Conference.

September 29, 2019, Paris, France
Microwave Characterization and Modelling at Nano and Micro-Scale of Advanced Materials to Enhance Emerging Products Manufacturing workshop during the European Microwave Week 2019.

September 9, 2019, Valencia, Spain
Modelling Workshop at the 17th International Conference on Microwave and High Frequency Heating, AMPERE 2019 conference.

September 9-12, 2019, Valencia, Spain
Exhibition at the 17th International Conference on Microwave and High Frequency Heating, AMPERE 2019 conference.

July 8-10, 2019, Turin, Italy
EMCC-CSA Workshop on industrial impact of materials modelling.

June 2-9, 2019, Boston, Massachusetts, USA
Exhibition at the IEEE MTT-S International Microwave Symposium 2019.

May 29-31, 2019, Cambridge, MA, USA
2019 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization.

March 31-April 4, 2019, Krakow, Poland
Exhibition at the 13th European Conference on Antennas and Propagation EuCAP 2019.

February 25-27, 2019, Vienna, Austria
EMMC Roadmap discussions at EMMC International Workshop.
More Events
News

December 29, 2022
New QW-Modeller 2022 released.

December 06, 2022
New QuickWave 2022 released.

November 25, 2022
We are pleased to announce our partnership with Rohde & Schwarz.

June 14-16, 2022
Presentation: B.Salski and M. Olszewska-Placha, "FDTD modeling of microwave power applicators", invited paper, 56th Annual Microwave Power Symposium (IMPI 56) of the International Microwave Power Institute, Savannah, GA, 14-16 June 2022.

January 11, 2022 (Internet)
NanoBat releases an animated clip on "Optimised Battery Production through Nanotechnology".

September 13, 2021
New QW-Modeller 2021 released.

September 13, 2021
New QuickWave 2021 released.

April 12, 2021
Program Stażowy "Rozwój kadr sektora kosmicznego".

April 1, 2021
QuickWave HOME OFFICE Licence - QWED response to COVID-19.

December, 2020
QWED in "Elity" magazine, "Electrifying Potential of the Polish Science".

December 23, 2020
New QW-Modeller 2020 released.

December 18, 2020
New QuickWave 2020 released.

September, 2020
QWED Company in Forbes magazine.

September 2, 2020
Program Stażowy "Rozwój kadr sektora kosmicznego".

July 1, 2020
QWED is pleased to announce its membership in International Electronics Manufacturing Initiative iNEMI and its participation in iNEMI projects.

June 11, 2020
QWED is pleased to announce its contribution to the book edited by U. Erle, P. Pesheck, and M. Lorence, "Development of packaging and products for use in microwave ovens", 2nd edition published by Elsevier.

May 21, 2020
QWED has qualified to offer 6-month apprenticeship within the 5th edition of the competition "Career Development for Space Sector".

April 10, 2020
QuickWave HOME OFFICE Licence - QWED response to COVID-19.

April 1, 2020
QWED is pleased to announce its participation in Horizon 2020 NanoBat - GHz nanoscale electrical and dielectric measurements of the solid-electrolyte interphase and applications in the battery manufacturing line project.

March 13, 2020
1000th unit of a dielectric-resonator test-fixture for material measurements has been sold by QWED.

February 21, 2020
Patch 2 for QuickWave 2019 released.

December 2, 2019
Patch 1 for QuickWave 2019 released.

October 30, 2019
New QuickWave 2019 released.

May 31, 2019
JService Technology Co., Ltd. became QWED's representative and exclusive distributor of QuickWave software for electromagnetic design and simulations in China.

April 1, 2019
New Fabry-Perot Open Resonator for precise measurements of electromagnetic properties of low-loss materials at 20-110 GHz range.
More News

Info

Why set up a modelling SME when your are student? The economic impact of QuickWaveTM software - recording available on the European Materials Modelling Council YouTube-Channel!